|
Specifications |
|
Form Factor |
ATX (12.00 inches by 9.60 inches) |
|
Supported Processors |
Intel Core 2 Extreme LGA775 1066, 1333,
1600 MHz
Intel Core 2 Quad LGA775 1066, 1333 MHz
Intel Core 2 Duo LGA775 800, 1066, 1333 MHz
Intel Pentium Dual Core LGA775 800 MHz
Intel Xeon Quad-Core LGA775 1066 MHz
Intel Dual-Core Xeon |
|
Supported Memory |
Four 240-pin DDR3 SDRAM Dual Inline Memory
Module (DIMM) sockets
Support for DDR3 1600 MHz, DDR3 1333 MHz, DDR3 1066 MHz, and DDR3 800 MHz
DIMMs
Support for up to 8 GB of system memory
Support for non-ECC memory |
|
Chipset |
Intel® X48 Chipset, consisting of:
Intel® 82X48 Memory Controller Hub (MCH)
Intel® 82801IR I/O Controller Hub (ICH9R) |
|
Audio |
Intel® High Definition Audio subsystem |
|
Legacy I/O Control |
Winbond legacy I/O controller for Consumer
Infrared (CIR) |
Peripheral
Interfaces |
Twelve USB 2.0 ports
Six Serial ATA interfaces with RAID support
Two External Serial ATA (eSATA) ports on back panel with RAID support
One Parallel ATA IDE interface with UDMA 33, ATA-66/100 support
Two IEEE 1394a ports |
|
BIOS |
Intel® BIOS resident in the SPI Flash device
Support for Advanced Configuration and Power Interface (ACPI), Plug and
Play, and SMBIOS |
Instantly Available
PC Technology |
Support for PCI Local Bus Specification
Revision 2.2
Support for PCI Express* Revision 1.0a
Suspend to RAM support
Wake on PCI, front panel, CIR, and USB ports |
|
LAN Support |
Gigabit (10/100/1000 Mbits/sec) LAN subsystem
using the Intel® 82566DC
Gigabit Ethernet Controller |
Expansion
Capabilities |
Two PCI* Conventional bus add-in card connectors (SMBus routed to both PCI
Conventional bus add-in card connectors)
Two PCI Express 2.0 x16 bus add-in card connectors
One PCI Express 1.1 electrical x4 (x16 connector) bus add-in card connector |
Hardware Monitor
Subsystem |
Hardware monitoring and fan control ASIC
Voltage sense to detect out of range power supply voltages
Thermal sense to detect out of range thermal values
Four fan headers using PWM control
Three fan sense inputs used to monitor fan activity
Fan speed control using voltage control (3-pin fan headers front and rear)
Support for Product Environmental Control Interface (PECI) |
